Axles and Brakes:

• 2 - 7,000 Lb Axles Straight: The trailer has two axles, each with a weight capacity of 7,000 pounds. This translates to a total weight capacity of 14,000 pounds.
• (2 Elec. Brakes F-Adj.): The trailer is equipped with electric brakes on both axles for improved stopping power.

• R50 - Slide-IN Ramps 16" x 80": The trailer has slide-in ramps measuring 16 inches wide and 80 inches long. These ramps provide easy access for loading and unloading equipment or materials.

• Scissor Hoist TH-516: This refers to the hydraulic system that raises the dump bed for unloading. The specific model is TH-516.

• Tube 2" x 6" Frame: The trailer's frame is constructed from rectangular steel tubes measuring 2 inches by 6 inches, providing a strong foundation.
• 20" 12ga. Dump Sides Std.: The sides of the dump bed are made from 12-gauge steel sheets, which are standard for dump trailers.
• Double Rear Swing Out Doors: The trailer has double doors at the rear that swing outward for unloading.

• ST235/80 R16 LRE 10 Ply: These are the tires used on the trailer. The code indicates:
• ST - Designed for trailers
• 235 - Section width in millimeters (approximately 9.3 inches)
• 80 - Aspect ratio (tire height as a percentage of width)
• R - Radial construction
• 16 - Rim diameter in inches
• LRE - Light Truck Radial, with lower ply count for reduced weight
• 10 Ply - Number of plies in the tire sidewall, affecting load capacity

• Bumper Pull Adj 14k Coupler 2 5/16: The trailer uses a bumper pull hitch with a 2 5/16 inch coupler. The coupler is adjustable and has a capacity of 14,000 pounds, matching the trailer's weight capacity.

• Diamond Plate Fenders: The fenders are made from diamond plate steel, offering greater durability compared to smooth fenders.
• Jack Spring Loaded Drop Leg 1-10K: The trailer comes with a spring-loaded drop leg jack with a capacity of 10,000 pounds, useful for trailer stabilization or changing tires.
• Tarp System (Front Mount): A tarp system is included, mounted at the front of the trailer to cover the cargo.
• Lighting LED (OVAL 6" & 3/4" w/ Grommet): The trailer has LED tail lights, clearance lights, and side marker lights.
• Standard Wiring Harness: The trailer comes pre-wired with a standard wiring harness for the lights.
• D-Rings 3" X 5/8" Weld On (4ech) Std.: Four D-rings are welded onto the trailer for securing cargo with tie-down straps.
• Spare Tire Mount (Weld On): A welded mount is included for carrying a spare tire.